Pallet NICOT for beehive or drum

Technical specifications :

Lateral stops and antislipping notches.

Pallet height 150 mm + Lateral stops height 5 mm. Pitch of stacking of 55 mm to saving in space.

Positioning with center pins Ø 9 mm : with several prepercied wholes Ø 10 mm on pallet and under the bottom board and the harvest plate, you may position bottom board and center harvest plate in 2 front points (harvest plate : use the nearest wholes of center of the pallet).

Fastening : with prepercied wholes, you may fasten in 4 points bottom board and harvest plate on the pallet with 4 truss-head screws Ø 4 x 15 mm.

Alternate superposition is possible with locations on legs to fasten the ones pallets on the others with center pins Ø 16 mm (place them on the 8 legs). You may superpose pallets on 2 levels, 3 levels...

Use of pallet for 1 tank: tank must be perfectly centered on the pallet. If not, place a 12 mm plywood plate on the pallet.

Manipulation of pallet during honey chamber harvest : pallet must be carry on its extremities. Place adjustable forks to obtain maximum external spacing, or add expander sheaths on forks.

Extralight: 1,3 Kg / PAL440X530.

Extrasmooth: no mould can stick.

To avoid warping, you must ALWAYS STOCK FLAT pieces.