100 kg/h SATURATED STEAM | 0.5 bar WORKING PRESSURE |
110 °C STEAM TEMPERATURE | 350 kg PACKED, ON A PALLET |
Low-pressure steam generator with an automatic diesel burner: 100 kg/h of steam to melt wax, feed steam wax melters and steam-clean in a wax room or a co-operative.
It is built in Murcia, Spain, and leaves the workshop tested and set up. This is a professional workshop boiler, not a benchtop generator. Before ordering, check three things: how much steam you really use, what your water is like and how you will install it.
01 · WHAT IT'S FOR
In a wax room, steam does three jobs: through a coil it heats the water in the melting tank where the blocks melt, it feeds the steam wax melters for frames, and it gives the heat to clean tanks and pipework. With 100 kg/h this unit handles all three at the same time. For scale: melting 300 kg of wax in two hours takes around 30 kg/h of steam. If you now work with a 5 or 7 litre electric generator, this is a different league: co-operatives, foundation makers and operations that handle wax by the tonne. One warning that applies to any steam equipment: it melts and cleans, but it does not sterilise. American foulbrood spores survive that temperature.
02 · HOW IT WORKS
It delivers saturated steam at 0.5 bar and 110 °C. It has an automatic single-stage diesel burner, run by a digital controller that reads the temperature with a Pt100 sensor. Water comes in by itself: a solenoid valve tops up from the mains and conductivity probes control the level and double as a safety device. As a last barrier it has a safety valve. Each unit is set up at the factory before shipping and comes with its rating plate, manual and technical sheets.
03 · WATER
A boiler evaporates the water and keeps everything that was dissolved in it. With hard water, limescale builds up on the heating surfaces, the probes and the pipes: the boiler burns more fuel, heats worse and ends up failing. That is why the filling system is designed for softened mains water and the manufacturer's warranty does not cover damage caused by poor water quality.
With this generator we supply a compact, single-tank metered water softener: it regenerates by itself, based on the water that has passed through, and takes up little room. It is supplied separately from the generator. Tell us your water hardness, or where you are, and we will confirm the model and its price.
04 · INSTALLATION
It arrives on a pallet measuring 120 × 80 × 188 cm and weighing 350 kg: you need a pallet truck or a forklift to unload it. On site it needs a mains water connection, electricity, diesel and a flue to the outside. Assembly and on-site adjustment are not included, nor the electrical supply or the flue work: your installer connects it. As it runs at 0.5 bar, the manufacturer states that in Spain it needs no engineering project or technical report to be installed and commissioned. Rules vary by country, and fuel storage and flues have their own: your installer will know them.
05 · BEFORE YOU BUY
It is built to order and we confirm the lead time when you order. If you are unsure about the size, tell us what you want to heat and how many kilos of wax you handle per batch: it is easier to get it right now than to change boiler later.
| ✓ FITS | Wax melting tanks with a steam coil, steam wax melters and steam wax boilers, steam cleaning. |
| ✕ DOESN'T FIT | Sterilising wax against American foulbrood, or running on unsoftened water. |
| ⚠ NOT INCLUDED | Assembly and on-site adjustment, electrical supply, flue work and water softener. |
| Model | SBV-60 |
|---|---|
| Steam output | 100 kg/h of saturated steam |
| Pressure and temperature | 0.5 bar · 110 °C |
| Burner | Diesel, automatic, single-stage |
| Diesel consumption | 6.87 kg/h |
| Water filling | Automatic by solenoid valve, at mains pressure · softened water |
| Control | Digital, with 3-wire Pt100 sensor |
| Safety devices | Level control by conductivity probes · safety valve |
| Total volume | 173 L |
| Heating surface | 4.8 m² |
| Dimensions (width × depth × height) | 611 × 831 × 1,605 mm |
| Empty weight | 278 kg |
| Delivery | Tested and set up at the factory · with rating plate, manual and technical sheets |
| Packaging | Pallet of 1,200 × 800 × 1,880 mm · 350 kg |
| Made in | Spain (Murcia) |
| Water softener (separate) | Compact, single-tank, metered · model and price on request |
Write your question
check_circle
check_circle