Electronic board for use with external 12V batteries (not included). You can connect up to 8-10 harps.
Electrical system, for the harps in the apiaries, with adequate tension and verified to avoid the Asian wasp. Battery is not included.
An electronic board is shipped with a sealed electrical box for use with 12v batteries. Output power 2200vdc. You can connect up to 8-10 harps. It is ready to be connected.
CONNECTION
You only have to pay attention that the red cable of the battery connects with the red connector, of the waterproof box, in battery INPUT. The box bears the corresponding labels so that there are no errors, being the only connection precaution to be observed. The electronic board works with a voltage of 12 V solar panels, in case you want to use solar panels you must take the correct article, which are available. The waterproof box is of IP55 category, so it is waterproof and can be protected from the rain.
Does it fit the Tartago harp? Yes. This standalone board powers the Tartago harp with no adapters. It is the cheapest way to run 8-10 harps if you already own a 12 V battery — the money goes into the battery, not the electronics.
And beware of a common mix-up: the board kit with battery and 20 W panel delivers exactly the same 2,200 Vdc as this board and yet does not fit the Tartago harp: it is built for another maker's harps. What decides compatibility is not the voltage, it is the connector. If your harp is a Tartago, this board yes; that kit no.

Electronic board for use with external 12V batteries (not included). You can connect up to 8-10 harps.
check_circle
check_circle