Order it before 6 hours and 56 minutes and receive it between Monday, 10 August and Wednesday, 12 August with Ontime
12 V power supply to run your Oxalika vaporiser off the mains or a generator instead of a car battery.
The 12 V Oxalika units normally clip straight onto a starter battery. This supply moves them to 220-230 V mains: useful when you treat at an apiary with a socket, in a shed, or when you would rather not depend on a battery's state of charge halfway through the day.
01 · WHAT IT POWERS
It covers one OXALIKA PRO Easy or PRO Fast, or up to three OXALIKA Premium or Basic running at the same time — which is the practical way to judge whether it is enough: three Premium draw 390 W simultaneously. It only makes sense on models that are not natively 220 V; if your unit already plugs into the mains, you do not need this supply.
02 · IN THE FIELD
If you use a generator rather than the mains, the manufacturer asks for at least 0.5 kW. A small petrol set covers it comfortably, but allow for the starting surge: pure sine wave inverter sets treat the electronics of a temperature-controlled vaporiser far better than a conventional dirty-wave generator.
03 · BEFORE YOU BUY
This is the 220-230 V version, the one that matches European mains. A 115 V variant also exists, which the manufacturer marks as not intended for the European Union market — that is not this one.
| ✓ FITS | OXALIKA PRO Easy, PRO Fast, Premium and Basic at 12 V. |
| ✕ DOESN'T FIT | Models that are natively 220 V: they need no supply. |
| ⚠ NOT INCLUDED | The vaporiser or the battery cable. |
| Input | 220-230 V mains, or a generator of at least 0.5 kW |
|---|---|
| Output | 12 V DC |
| Capacity | One OXALIKA PRO Easy or PRO Fast · or up to 3 Premium/Basic at once |
| Compatibility | 12 V models only; does not apply to natively 220 V units |
check_circle
check_circle