Tripod stand for strainer Ø32

⚙️ Keeps the filter up high, clear of the strained honey

The ring holds the mouth of the conical filter and the three legs raise it above the container, so the tip stays in the air and drips freely instead of sitting submerged in the honey that has already passed through. Without a stand like this you would have to hold the filter by hand or wedge it on the rim, where it slips and dips in. The ring measures 30.3 cm inside diameter and the whole thing lifts the filter 48 cm off the bench, high enough to strain straight into a bucket or a honey tank.

🔧 Stainless ring and wooden legs, disassembles for storage

The stainless steel ring withstands contact with honey and wipes clean with a damp cloth without corroding. The wooden legs are bolted to the ring with stainless hardware, so the stand comes apart flat and takes up little room in the off-season. Dry the wood after use and do not leave it soaking.

⚠ Filter not included. This is the frame only. It fits conical cloth or nylon strainers (the «pointed» type) with a mouth of around 30 to 33 cm; the strainer is bought separately according to the mesh fineness you need.