Hive Barrow

199 .95 €

BR-60585

Hive Barrow

Share in WhatsApp

199 .95 €

Tax included

Last items in stock

Single-wheel hive trolley with low 56 × 45 cm support grid, 46.5 × 49 cm anti-tip frame and Ø25.5 cm pneumatic tyre. Tubular steel, 1.40 m and approx. 13 kg according to maker. Check the floor; maximum load is not stated.

199 .95 €

Tax included

Last items in stock

Quantity

Select options Options

Express Shipping

Return Guarantee

Safe payment

Details of Hive Barrow

56 × 45 cm

SUPPORT GRID

46.5 × 49 cm

ANTI-TIP FRAME

Ø 25.5 cm

PNEUMATIC WHEEL

APPROX. 13 kg

MAKER’S WEIGHT

Single-wheel hive trolley with a low 56 × 45 cm support grid, anti-tip frame and pneumatic tyre.

Its geometry lets the grid enter beneath the hive, transferring the load towards the wheel instead of carrying it by hand. Do not choose it by hive name alone: compare the complete floor footprint with the grid and anti-tip frame.

01 · COMPATIBILITY

The floor must rest securely on the 56 × 45 cm grid

The manufacturer lists common hive systems including Dadant and several modular hives, but actual fit depends on the whole floor, landing board, feet and projections. A narrow nuc can be poorly supported and a 14-frame hive may overhang excessively. Measure the floor and make sure it cannot drop through or tip against the frame.

02 · LOAD CONTROL

Low grid, anti-tip frame and two handles

The support grid is 56 × 45 cm and the front frame 46.5 × 49 cm. Non-slip plastic grips help control the angle. No maximum load is published: secure the hive with a strap and never infer capacity from the photograph.

03 · GROUND

A Ø 25.5 cm pneumatic tyre softens uneven surfaces

The air-filled tyre travels over gravel, soil and small steps better than a hard wheel, but it remains a one-wheel trolley and requires lateral balance. Set the pressure, clear the route and practise empty; use assistance on slopes.

04 · BEFORE YOU BUY

Check footprint, route and the stated weight

Overall length is approximately 1.40 m and the manufacturer quotes about 13 kg. Maximum load and overall assembled width are not published. Confirm the transport weight if it affects your logistics.

✓ FITS	Hive floors that rest continuously and securely on the 56 × 45 cm grid.
✕ NOT CONFIRMED	Narrow nucs, 14-frame hives or projecting floors unless measured.
⚠ NOT STATED	Maximum load and overall assembled width.

SPECIFICATIONS

Reference	BR-60585 · Stade model
Frame	Coated tubular steel
Support grid	56 × 45 cm
Anti-tip frame	46.5 × 49 cm
Wheel	Air-filled rubber tyre · Ø 25.5 cm
Handles	Non-slip plastic grips
Overall length	Approximately 1.40 m
Manufacturer weight	Approximately 13 kg
Maximum load	Not stated