Buy it now and receive it between Tuesday, 24 November and Thursday, 26 November with Ontime
70 mm WORKING DIAMETER | 4 POSITIONS |
A 70 mm plastic disc with four positions: open, closed, ventilation and queen excluder.
This is the part that turns a hole into a decision. It fits on the entrance or screws over the crown board hole and, by turning it, you change what can pass through without opening the hive or touching a frame.
01 · THE FOUR POSITIONS
Open lets every bee through. Closed lets nothing through — the transport setting. Ventilation is the mesh: air passes, the bee does not, which is what you need with the hive shut for a move or in a freshly made nuc. And queen excluder lets the worker out and holds the queen back, the setting you work with in queen rearing and for governing the passage between brood box and super.
02 · FITTING
It goes on the entrance or is screwed over the hole in the crown board, depending on what you want to govern: flight or internal passage. The disc is 85 mm across and leaves a working opening of 70 mm; the hole you mount it over has to fall within that.
03 · BEFORE YOU BUY
It is a simple, inexpensive part, and the only possible incompatibility is geometric: if the hole in your crown board or entrance is over 70 mm, the disc will not cover it. Measure it before ordering several.
| ✓ FITS | Holes up to 70 mm in the entrance or crown board. |
| ✕ DOESN'T FIT | Openings larger than 70 mm. |
| ⚠ NOT INCLUDED | Fixing screws. |
| Material | Plastic |
|---|---|
| Working diameter | 70 mm |
| Outer diameter | 85 mm |
| Positions | Open · closed · ventilation · queen excluder |
| Mounting | Entrance or crown board hole |
| Manufacturer | ANEL · reference HA09-5 |
Data sheet

Write your question
check_circle
check_circle