A lifting clamp for handling honey drums in an upright position with a crane or hoist, without improvising attachment points on the container.
Its three arms engage beneath the drum's top rim and tighten as the load is applied. It is intended for vertical lifting of steel or plastic drums with a strong, compatible rim, up to a maximum load of 300 kg.
300 kg Stated maximum load | Vertical Lifting direction | 3 arms Grip beneath the rim |
|---|
Lifting operation: before every lift, inspect the clamp, its joints and the entire drum rim. Use only a crane or hoist and lifting accessories with adequate capacity; keep the load upright, clear the area and never allow anyone beneath the suspended drum.
01 · HOW IT WORKS
Centre the assembly over the lid and place each arm beneath the rim. When the top lifting point is tensioned, the arms close around the container and the clamping force increases with the load. This geometry distributes the effort and avoids feeding slings beneath the drum. The spring helps keep the assembly gathered while it is positioned, but the operator must visually confirm that all three contact points are properly seated before lifting.
02 · COMPATIBILITY
A round shape or a particular capacity does not make a drum compatible. Its top rim must be continuous, rigid, accessible and able to accept all three hooks underneath without relying on the lid alone. Do not use it on distorted, cracked, very flexible or partly open rims. With an unfamiliar container, check the fit while empty and at floor level before attempting any movement.
03 · HANDLING
Connect the top ring to a suitable lifting component, take up the slack gradually and check that the clamp remains centred. Raise the drum only as far as needed, avoiding shocks, swinging and sudden travel. This model is for lifting and positioning an upright drum; it is not designed for tipping, angled emptying, dragging or carrying a suspended load over a distance.
04 · BEFORE BUYING
The stated maximum load is 300 kg and must be considered together with the actual rating of the crane, hoist and every connecting accessory. The drum needs a compatible rim in sound condition. Crane, hoist, sling, shackle and other lifting components are not included. If these three points cannot be verified for your container, do not assume compatibility.
| Reference | GAN300 |
|---|---|
| Type | Vertical drum lifting clamp |
| Configuration | Three articulated gripping arms |
| Stated maximum load | 300 kg |
| Containers | Steel or plastic drums with a compatible top rim |
| Operation | With a suitable crane or hoist |
| Orientation | Drum kept upright |
| Finish | Painted steel |
| Not intended for | Tipping, dragging or people beneath the load |
check_circle
check_circle