The "Angel" silicone mould is perfect for crafting beautiful, detailed beeswax candles with a professional finish. Made from flexible silicone, this mould ensures excellent durability, safety, and easy reuse, retaining its shape and detail even after many uses.
Silicone mould of the angel: a candle 10 cm tall and 7.2 across from about 75 grams of wax.
Thirteen candles to the kilo, and a large wick. At 75 grams a piece, a kilo of wax gives thirteen angels. And at 7.2 cm across at the base, the wick it asks for is a 3 × 10: this is not a narrow figure.
01 · 75 GRAMS, 13 CANDLES A KILO
The mould is 11 cm tall and 8.5 across — 26.5 in circumference — and the candle comes out at 10 cm by 7.2. That difference is the filling margin.
On a figure of that width, the 3 × 10 wick is the one that gets the pool of wax out to the wall. A thinner one opens a central well and leaves the angel standing on the outside and hollow inside.
02 · POUR AT 70-75, NOT AT 65
Beeswax melts between 62 and 65 °C. Pouring right at 65 means pouring wax that has only just liquefied, thick, and it reaches the folds of the robe and the wings only halfway. The comfortable point is 70-75 °C.
The upper limit is 85 °C, above which wax darkens. Pour slowly, with the wick centred and held, and do not touch the mould until the piece is completely cold. The mould has a slit: before pouring, close it with rubber bands so the wax does not escape through the join.
03 · BEFORE YOU BUY
A gift figure with good detail.
| ✓ FITS | Beeswax, 75 g a candle and a 3 × 10 wick; a piece 10 cm tall. |
| ⚠ WICK NOT INCLUDED | It goes separately, and here the size matters: 7.2 cm across calls for a large wick. |
| ✕ NOT FOR LONG RUNS | At thirteen candles a kilo it is a single-piece figure. The small moulds give twice as many. |
| Design | Angel |
|---|---|
| Material | Flexible heat-resistant silicone |
| Mould size | 11 cm tall · Ø 8.5 cm (26.5 cm circumference) |
| Candle size | 10 cm tall · Ø 7.2 cm |
| Wax a candle | About 75 g (about 13 candles to the kilo) |
| Recommended wick | 3 × 10, not included |
| Pouring temperature | 70-75 °C for beeswax |
| Unmoulding | Mould with a slit: closed with rubber bands, opened when the piece is cold |
| Reference | FS529 |
Data sheet
Specific References
The "Angel" silicone mould is perfect for crafting beautiful, detailed beeswax candles with a professional finish. Made from flexible silicone, this mould ensures excellent durability, safety, and easy reuse, retaining its shape and detail even after many uses.
check_circle
check_circle