The "Eiffel Tower – Small" silicone mould is an elegant and original choice for crafting handcrafted beeswax candles with a Parisian flair. Inspired by the iconic French monument, this detailed mould produces a decorative piece that’s perfect as a gift, for themed spaces, or simply to add a touch of sophistication and charm to any setting.
Eiffel Tower mould: a tall, slender candle of 11.5 cm from about 50 grams of wax, roughly 20 to the kilo.
Tall and narrow, which is a case of its own. Almost twelve centimetres of height with very little section: that is why the wick is a small 3 × 6, and why the pour has a technique to it. An oversized wick on a candle like this throws it off balance.
01 · TALL AND THIN: 50 G, 3 × 6 WICK
At about 50 grams a piece you get on the order of 20 candles to the kilo: little wax for a lot of effect, which is what makes this figure interesting on the counter.
The 3 × 6 is a fine wick because the tower's section is small. A bigger one gives no more light: it makes a flame that eats the wall on one side and ends up leaning the candle. It is not included.
02 · POUR SLOWLY INTO THE LATTICE
The wax is poured between 70 and 75 °C — it melts at 62-65 and darkens above 85 — in a thin stream and without hurry. The tower's lattice is the part of the mould where a bubble most easily gets trapped, and a bubble there is a stretch of structure that never appears.
After that, the mould is not moved until the candle is completely cold. On a slender piece, unmoulding while warm is the quickest way to bend it.
03 · BEFORE YOU BUY
A lot of figure for very little wax.
| ✓ FITS | Beeswax, about 50 g a candle and a 3 × 6 wick; a piece 11.5 cm tall. |
| ⚠ WICK NOT INCLUDED | It goes separately, and on this figure the size matters more than on any other: small section, fine wick. |
| ✕ NOT A STABLE TABLE CANDLE | It is tall and narrow. It wants a flat base and a spot sheltered from draughts while it burns. |
| Design | Eiffel Tower, small |
|---|---|
| Material | Flexible heat-resistant silicone |
| Height | 115 mm |
| Wax a candle | About 50 g (about 20 candles to the kilo) |
| Recommended wick | 3 × 6, not included |
| Pouring temperature | 70-75 °C for beeswax |
| Pouring | Thin stream, to leave no bubbles in the lattice |
| Reusable | Yes, unmoulding cold |
| Reference | FS301 |
Data sheet
Specific References
The "Eiffel Tower – Small" silicone mould is an elegant and original choice for crafting handcrafted beeswax candles with a Parisian flair. Inspired by the iconic French monument, this detailed mould produces a decorative piece that’s perfect as a gift, for themed spaces, or simply to add a touch of sophistication and charm to any setting.
check_circle
check_circle