Flexible, heat-resistant mould for making 8 heart-shaped tealight candles. Works with beeswax, paraffin, soy wax, resins and more. Perfect for beekeepers and crafters.
Flexible eight-cavity mould for heart-shaped tealights, with a central hole for a metal-based wick.
It is how you turn leftover wax into small pieces. Fix the wick, pour, let it cool; the flex in the mould is what lets you release the piece without cracking it.
01 · THE WICK
Each cavity has its central hole for a wick with a metal sustainer: that base keeps the wick upright while the wax sets and makes the tealight burn to the bottom. With beeswax the wick also goes thicker than with paraffin — it melts higher, and a short wick drowns.
02 · WAX SHRINKS
As it cools, wax contracts and leaves a dip round the wick: fill it with a second pour once the surface has set and the centre is still warm. And filter the wax before pouring, because a speck pushes the wick off centre and on a piece this small it shows.
03 · WHAT YOU CAN USE IT WITH
Flexible heat-resistant plastic: it takes beeswax, vegetable waxes and paraffin, and resin or plaster for decorative pieces.
04 · BEFORE YOU BUY
A tealight runs to about 15 g of wax: count on a little over 100 g a batch, and weigh the first for your own figure.
| ✓ FITS | Turning cappings wax into small pieces for gifts or a market stall. |
| ✕ DOESN'T FIT | For medium-sized candles: the piece here is a tealight. |
| ⚠ NOT INCLUDED | No wax, and no metal-based wicks. |
| Reference | FM023 |
|---|---|
| Capacity | 8 heart-shaped tealights |
| Wick | Central hole for a metal-based wick |
| Material | Flexible heat-resistant plastic |
| Size | 22.5 × 16 cm |
| Use | Reusable · hot water and mild soap, stored flat |
| Works with | Beeswax, vegetable waxes, paraffin, resin or plaster |
| Weight | 600 g |
Specific References
Flexible, heat-resistant mould for making 8 heart-shaped tealight candles. Works with beeswax, paraffin, soy wax, resins and more. Perfect for beekeepers and crafters.
check_circle
check_circle