- New
- Out of stock
Replacement gas jet —part no. 7, also called the injector— for the Furetto vaporiser: the calibrated orifice the gas passes through on its way to the burner.
If the Furetto has gas but the flame is weak, goes out or is hard to light, the gas path is the first thing to check, and the jet is the smallest part of that path.
01 · WHAT IT DOES
The jet is a nozzle with a very fine orifice that lets just the right amount of gas through to the burner. Because it is so fine, it is also where dirt collects: with the orifice partly blocked, the machine has gas but the flame does not give the coil the heat it needs to reach red heat.
02 · WHEN TO REPLACE IT
It cannot be recalibrated or opened up: an orifice forced clean with a needle no longer meters properly. If the flame has lost strength and the burner is in good condition, replacing the jet is the simplest repair. If you smell gas, do not light it: check the joints first.
03 · BEFORE YOU BUY
This is part no. 7 of the Furetto parts diagram. If the fault is the gas supply from the cartridge, look at the valve (no. 8); if the machine heats up but no fog comes out, the problem is in the liquid circuit, not here.
| ✓ FITS | Furetto vaporiser, position no. 7 of the parts diagram. |
| ✕ DOESN'T FIT | Vaporisers from other brands and the other positions on the Furetto's own parts diagram. |
| ⚠ NOT INCLUDED | The gas pipe: sold separately. The jet filter is included. |
| LTA reference | FRG-7 |
|---|---|
| Part | No. 7 of the Furetto parts diagram (getto) |
| Function | Meters the gas to the burner |
| Compatible with | Furetto vaporiser |
| Manufacturer | Gremigni (Italy) |
| Contents | 1 gas jet with its filter |
Data sheet
Write your question
check_circle
check_circle