- New
10 m lead to set the electric module apart from the first harp: the panel where the sun is, the harp in front of the hive entrances.
This is the male/female extension: it extends the module's cable to the input of the first Tártago harp. To join one harp to another, use the female/female lead.
01 · WHAT IT IS FOR
The solar module comes with 1.5 m of cable and usually hangs from the first harp. If the sun does not reach it well there, or the module has to sit next to a socket, this lead lets you place it up to 10 m further away and carry the current to the harp. The other harps are still chained to each other with the female/female extensions.
02 · WHICH ONE YOU NEED
Tártago uses two leads with the same waterproof connector. The male/female one, this one, goes from the module to the first harp. The female/female one goes from the output of one harp to the input of the next. If you want to move the module away and also chain harps, you need both.
03 · BEFORE YOU BUY
It is just the cable; the module and the harps are sold separately.
| ✓ FITS | Tártago modules: 15 W solar, solar with battery and universal, with water-tray or dry harps. |
| ✕ DOESN'T FIT | Joining one harp to another: that is what the female/female lead is for. |
| Reference | EXT10MMH |
|---|---|
| Type | Extension from the module to the first harp |
| Length | 10 m |
| Connectors | Male at one end and female at the other, waterproof |
| Compatibility | Modules MES10W, MES12WLI and MEUARPATAR · harps TA-6090 and X-6090-SECA |
| Not for | Joining harps to each other (female/female) |
check_circle
check_circle