Stainless Steel Honey Filter Tripod Stand

49 .75 €

FT19-2

Stainless Steel Honey Filter Tripod Stand

Out of stock

Share in WhatsApp

49 .75 €

Tax included

Out of stock

Stainless steel honey filter tripod, available in 320mm and 450mm, perfect for efficient honey filtering with conical or round filters.

Diameter

320mm
450mm

49 .75 €

Tax included

Out of stock

Options

CERRAR

Quantity

Select options Options

Express Shipping

Return Guarantee

Safe payment

Details of Stainless Steel Honey Filter Tripod Stand

Stainless steel tripod that holds the filter over the bucket or the settling tank, in 320 and 450 mm.

It holds the filter and leaves you both hands free. That is all it does, and it is what you miss when you are holding the cone with one hand.

01 · WHERE IT GOES

Over the bucket, at the right height

The three legs rest on the rim of the bucket or settling tank and keep the filter raised and centred, clear of the bottom. It is stainless: honey is acidic and there is nothing here to pit.

02 · FILTERING GOES IN TWO STEPS

Coarse mesh first, fine mesh after

Coming out of the extractor you use a double stainless mesh, which takes out wax and bits; then, before the settling tank, a fine nylon mesh.

With one nuance: straining through mesh is not the «filtered honey» of the Regulation — that one has lost its pollen and gives up its floral origin — and settling in the tank is still needed.

03 · THE TWO SIZES

320 or 450, depending on your filter

The filter decides, not the bucket: a cone rests on its rim, so the stand has to sit below that measurement.

If you already have a filter, measure its rim; if not, choose the filter first.

04 · BEFORE YOU BUY

It comes in 320 and 450 mm. If your filter is another size, ask us which one holds it.

✓ FITS	Filtering through a cone over a bucket or tank without holding it by hand.
✕ DOESN'T FIT	As a filter: this is the stand, the mesh is separate.
⚠ NOT INCLUDED	Neither the cone filter nor the double mesh. Nor the bucket.

TECHNICAL DATA

Type	Tripod stand for honey filters
Sizes available	320 mm and 450 mm
Material	Stainless steel
Support	Three legs on the rim of a standard bucket or settling tank
Works with	Cone and round filters whose rim is larger than the stand
Not included	The filter or the container