LYSON Honey Settling Tank 100 kg Premium Honey tanks
LYSON Honey Settling Tank 100 kg Premium
175 .95
W713_K

LYSON Honey Settling Tank 100 kg Premium

  • Top quality
LYSON Honey Settling Tank 100 kg Premium Honey tanks
  • LYSON Honey Settling Tank 100 kg Premium Honey tanks
  • LYSON Honey Settling Tank 100 kg Premium Honey tanks
  • LYSON Honey Settling Tank 100 kg Premium Honey tanks
  • LYSON Honey Settling Tank 100 kg Premium Honey tanks
  • LYSON Honey Settling Tank 100 kg Premium Honey tanks
  • LYSON Honey Settling Tank 100 kg Premium Honey tanks
  • LYSON Honey Settling Tank 100 kg Premium Honey tanks
whatsapp Share in WhatsApp
175 .95
Tax included

Stock

70 L stainless steel settling tank with 1.5” valve, ergonomic handles, and hermetically sealed lid. Perfect for small batch honey clarification. Made in Europe.

175 .95
Tax included

Stock
Quantity
Select options Options

Express Shipping

Return Guarantee

Safe payment

Details of LYSON Honey Settling Tank 100 kg Premium

Seventy-litre stainless steel settling tank — around 100 kg of honey — with a reinforced clamp-sealed lid and a 1½-inch tap for filling without drips.

A settling tank does not filter: it lets the honey sort itself out. Air bubbles, foam and wax particles rise, the clean honey stays underneath, and what has risen is skimmed off before bottling.

01 · WHAT IT DOES AND WHAT IT DOESN'T

It settles, but it does not lower the moisture

Resting separates by density, and that is why it works — nothing to do with filtering. The warmer the honey and the taller the tank, the sooner the bubbles come up; cold thick honey stretches the process into days.

What it does not do, and it is worth knowing before you buy: a settling tank does not dry honey. If it goes in above 20 % moisture, closing the lid will not fix that — you need a dehumidifier. The airtight lid is there for the opposite reason: honey is hygroscopic and, left open in a damp room, it takes water out of the air.

02 · THE TAP

An inch and a half is 40 mm of bore

The tap is stainless steel, 1½" (6/4", DN 40): forty millimetres of clear bore. That calibre is what lets thick or starting-to-crystallise honey through without the flow choking, and what lets you open and close half way to fill jar by jar.

The calibre of a tap cannot be deduced from the litres of the tank: you read it in inches and check it against the hose or filler you already own.

03 · THE VALVE, 50 MM UP

You have to raise it before you can fill

The outlet sits five centimetres above the base, and that has two consequences the factory sheet leaves out. First: standing on the floor, nothing fits underneath — no jar, no bucket. The tank goes on a table, a pallet or a stand, and that is what decides whether you work comfortably.

Second: the last few centimetres sit below the outlet, about six litres that will not come down on their own. You recover them by tilting the tank at the end of the batch.

04 · MOVING IT

Full it is 120 kilos, not a tank you carry

Empty it weighs 20 kg and full it is over 120. The PVC-coated handles are for positioning it, turning it and steadying it while it empties; not for lifting it loaded. The rule is simple: fill it where it is going to stay.

The rest of the finish follows the same line — a perimeter ring that keeps the lid from deforming, a silicone seal and metal clamps that fix it in seconds.

05 · BEFORE YOU BUY

Seventy litres is a small batch: the question is not how much honey you have, it is how much you handle at once.

✓ FITSSmall batches, single-flower honeys you want kept apart, and a waist-height place to stand it.
✕ DOESN'T FITIf you expect it to correct the moisture of an unripe honey, or if you bottle hundreds of kilos at a stretch.
⚠ NOT INCLUDEDThe stand or table it goes on — not an extra here: it is what lets you get a jar underneath.

TECHNICAL DATA

Capacity70 litres · around 100 kg of honey
Dimensions615 mm high · 400 mm diameter
MaterialFood-grade stainless steel
TapStainless steel, 1½" (6/4", DN 40)
Valve height50 mm above the base
LidReinforced with a perimeter ring, silicone seal and metal clamps
HandlesErgonomic, PVC coated
Empty weight20 kg
ManufacturerLYSON (Poland)
21 Items

Data sheet

Capacity (kg)
51 to 100 kg