Paraffin wax box 24KG

01 · APPLICATION

Coating by immersion or brush

Immersion application requires a properly sized, stable tank with controlled temperature. The brush application option allows for working in sections, but the wax must be kept sufficiently fluid without overheating or accumulating in joints and recesses.

02 · THERMAL LIMIT

Thermal data from the data sheet

The stated solidification point is 68–75 °C and the dropping point is 75–85 °C. These are material characteristics, not a universal working method. The equipment, volume, and part determine the safe procedure.

03 · DOSING

Five slabs for batching the amount to melt

The box contains 24 kg divided into five plates. Store them in a cool, dry place, protected from sunlight, dust, and excessive temperatures. Melt only the amount that the equipment can handle with a margin of safety.

04 · BEFORE YOU BUY

⚠ PRECAUTIONS

Molten wax: serious risk of burns and fire. Work in a prepared, ventilated area free of flames, sparks, and moisture. Use appropriate heat protection, face protection, gloves, and clothing. Never pour water on hot or burning wax: it can cause it to spray violently. Have a suitable fire suppression plan in place. This coating should not be described as disinfection or sterilization. Before treating entire batches, validate the process on a single piece and define how temperature, time, drainage, and fire risk will be controlled.