230 V / 12 V AC INPUT, DC OUTPUT | 180 W · 15 A POWER AND CURRENT |
LYSON replacement power supply for the BASIC electric extractors from Ø 720 to 900 mm, the ones fitted with the HE-01V digital controller.
It converts 230 V mains into 12 V direct current, the voltage of the motor in this range. It delivers up to 180 W and 15 A: 30 W of headroom over the 150 W motor.
01 · COMPATIBILITY
It fits the LYSON BASIC line with the HE-01V controller and a 12 V, 150 W motor: the radial and cassette models of Ø 720, 800 and 900 mm. In our catalogue these are the 4-frame Dadant reversible of Ø 800, the 6-frame reversible of Ø 900 and the Ø 900 radial. Check the control box label before ordering: the smaller-drum BASIC models use a different motor and control, and the OPTIMA, CLASSIC and MINIMA ranges have different electronics.
02 · BEFORE YOU BUY
If the extractor won't start, measure before swapping parts: a healthy supply gives 12 V at the output. If it does, the fault is elsewhere: the controller, the motor or the lid sensor.
| ✓ FITS | LYSON BASIC extractors from Ø 720 to 900 mm with the HE-01V controller and a 12 V / 150 W motor. |
| ✕ DOESN'T FIT | BASIC models under Ø 720 mm and OPTIMA, CLASSIC or MINIMA extractors. |
| Reference | 41110105 |
|---|---|
| Brand | LYSON |
| Input | 230 V AC |
| Output | 12 V DC |
| Power / current | 180 W / 15 A |
| Controller | HE-01V (BASIC range) |
| Motor powered | 12 V / 150 W DC |
| Extractors | LYSON BASIC Ø 720, 800 and 900 mm, radial and cassette |
Data sheet
Write your question
check_circle
check_circle