- To order
100 cm PLATE: UP TO 65 CONTAINERS OF 1 LITRE OR 500 G | 400 CONTAINERS OF 500 G PER HOUR WITH THE FILLER, PER FILLING EVOLUTION |
0.4-7.5 rpm ADJUSTABLE ROTATION | 1 CAPACITIVE SENSOR: FILLING TRIGGERS ITSELF |
Auto M turntable for the Honeyaid filling machine (3106): a 100 cm plate holding up to 65 one-litre containers or 500 g jars, with a capacitive sensor that detects the jar under the nozzle and triggers filling without anyone pressing anything. Rotation adjustable from 0.4 to 7.5 rpm and a mobile frame on wheels. With the filler, up to 400 containers of 500 g per hour according to Filling Evolution. The filling machine is not included.
With an operator placing jars by hand, the filler never reaches its maximum: the bottleneck is positioning each container under the nozzle.
01 · HOW IT WORKS
An arm with a capacitive sensor, adjustable on the side column, detects the container in the right position and sends the start signal to the Honeyaid. When filling ends, the plate moves on to the next one. The operator is no longer tied to the nozzle: empties go on at one side, fulls come off at the other. Rotation is set between 0.4 and 7.5 rpm to match dose and format, which is what stops jars piling up or the plate running ahead of the machine.
02 · WHAT FITS AND AT WHAT RATE
The 100 cm plate holds up to 65 one-litre bottles or 500 g jars. Filling Evolution gives up to 400 containers of 500 g per hour for table and filler together: it is the system’s figure, not the table’s alone, and it depends on the dose, the viscosity and how fast empties are replaced. A closed guard rail keeps jars from leaving the plate as it turns.
03 · HOW THE LINE GROWS
The table is built to be the centre of a longer line: with the optional container sorter and side outlet, filled jars are diverted to a collection table or onto a belt that takes them to the capper or the labeller. No structural change is needed to add it. The tubular frame with four wheels, two of them braked, lets you move the whole line without disconnecting anything, which in shared rooms is half an hour of work each time.
04 · WHO IT IS FOR
It is an accessory to the Honeyaid (3106): without it, it does nothing. It makes sense when hundreds of containers are filled a day and the operator’s time at the nozzle pays for itself. To fill tincture or mead with the same machine there is the propolis set (3107), and for royal jelly and creams the S gear one (3108); the table’s container sensor works with those two as well.
05 · BEFORE YOU BUY
The turntable is supplied; the Honeyaid filler (3106), the sorter and the conveyor come separately.
| ✓ FITS | Honey rooms with a Honeyaid filling hundreds of containers a day that want the operator off the nozzle. |
| ✕ DOESN’T FIT | Anyone without the Honeyaid: it is an accessory, not a filling machine. |
| ⚠ NOT INCLUDED | The filler, the sorter or the conveyor. |
| Reference | 30303800 |
|---|---|
| Brand | Honeyaid, Filling Evolution GmbH, Dresden |
| Model | Auto M |
| Compatibility | Honeyaid filling machine (3106) |
| Plate diameter | 100 cm |
| Plate capacity | Up to 65 containers of 1 L or 500 g jars |
| Rotation | Adjustable from 0.4 to 7.5 rpm |
| Trigger | Capacitive position sensor |
| System output | Up to 400 containers of 500 g per hour, per the manufacturer |
| Frame | Tubular with four wheels, two braked; guard rail |
| Extensions | Container sorter and side outlet, optional |
| Filler extensions | Propolis set (3107); royal jelly set (3108) |
Data sheet
check_circle
check_circle