Stainless steel clamp to tip a bucket of honey into a honey tank, vessel or drum without holding it by hand: the claws hook onto the bucket rim, adjust to walls of 0.5 to 2.4 cm and the two 40.5 cm arms act as a long handle to tilt it resting on the edge of the receiving container. 14 cm wide, 0.8 kg, no tools.
A 25 kg bucket of honey tips badly: the weight gets away, the rim slips and honey lands outside; with the clamp the bucket has a long handle and a pivot.
01 · WHAT IT DOES
The claws close on the bucket rim and lock with the wing nut; the two 40.5 cm arms stick out as a handle and give the leverage a full bucket lacks. Rest the bucket on the edge of the tank or drum and tilt it from the handle with one hand while the other guides the stream: the honey falls inside, slowly or all at once as needed, and the bucket does not get away mid-tip. With thick or cold honey, the leverage is what lets you dose instead of dumping.
02 · WHICH BUCKETS
The hooks adjust for rims 0.5 to 2.4 cm thick: food-grade plastic buckets of 20-25 kg, with or without a lip, and metal buckets. The receiving container needs a free edge to rest the tip on, which is the case of honey tanks, vessels and drums. All stainless, 14 cm wide and 0.8 kg: it washes with hot water and honey does not pit it.
03 · BEFORE YOU BUY
The clamp is supplied alone; the bucket comes separately.
| ✓ FITS | Anyone moving honey from 20-25 kg buckets into tanks or drums by hand who wants to tip with control and no spills. |
| ✕ DOESN’T FIT | Buckets with a very thick rim or containers with no free edge: measure first. |
| ⚠ NOT INCLUDED | Bucket. |
| Reference | HS-104 |
|---|---|
| Material | Stainless steel |
| Rim thickness taken | 0.5 to 2.4 cm |
| Arms | 40.5 cm |
| Width | 14 cm |
| Weight | 0.8 kg |
| Adjustment | Wing nut, no tools |
check_circle
check_circle