RuBee® Heated stainless steel honey tank 50kg

297 .95 €

BR-31480-HS-069

RuBee® Heated stainless steel honey tank 50kg

Name: RuBee® Heated stainless steel honey tank 50kg
SKU: BR-31480-HS-069
Price: 297.95 EUR
Availability: InStock
Rating: 5 (1 reviews)

See 1 Customer Reviews

Share in WhatsApp

297 .95 €

Tax included

Last items in stock

RuBee stainless-steel honey tank for 50 kg, with fully sloping heated base, 20–45 °C thermostat and 100 W power at 230 V. Helps maintain a consistent flow during jar filling.

297 .95 €

Tax included

Last items in stock

Quantity

Select options Options

Express Shipping

Return Guarantee

Safe payment

Details of RuBee® Heated stainless steel honey tank 50kg

50 kg

HONEY CAPACITY

100 W

HEATING

20–45 °C

THERMOSTAT

Ø 309 × 610 mm

TANK BODY

Heated 50 kg RuBee honey tank for keeping honey fluid and obtaining a steadier flow while filling jars.

The fully sloping base directs honey towards a gate positioned 105 mm above the bottom of the vessel. Its 100 W heater provides gentle warming and the thermostat operates from 20 to 45 °C. It supports filling; it is not a means of correcting high moisture or rapidly melting a completely solid block.

01 · FILLING

A sloping base guides honey towards the outlet

The heated base slopes over its full area, rather than only around the gate. This helps honey move towards the outlet and reduces the amount spread across the bottom at the end of a run. The gate is 105 mm above the base; check this clearance against the jar or filling table you intend to use.

02 · TEMPERATURE CONTROL

100 W to maintain flow, with a 45 °C maximum

The thermostat adjusts from 20 to 45 °C. Its practical role is to temper honey during filling so that the flow remains manageable. Use the lowest setting that provides the required flow and keep heating time short: effects on enzymes and HMF depend on time and temperature together.

03 · HONEY QUALITY

Heating does not replace measuring, settling or drying

Heat temporarily lowers viscosity, but it does not remove excess moisture by itself or repair unripe honey. Check moisture with a refractometer and allow the honey to settle when foam and air need to rise. For a fully solid mass, use equipment designed to warm it evenly and under control.

04 · CLEANING

Clean the product path without wetting the controls

Empty the tank while the honey is still fluid, open or dismantle the gate as its design allows, and remove residues before they crystallise. Use warm water and non-scratch tools; avoid abrasives. Do not immerse the thermostat housing or electrical connection or expose them to pressure washing.

05 · BEFORE YOU BUY

Check capacity, working height and heating duty

The vessel holds approximately 50 kg of honey, measures Ø 309 × 610 mm and runs on 230 V at 100 W. It is intended to assist filling and maintain fluidity. If your main task is thawing drums or liquefying a solid block, choose a warming cabinet or jacket made for that duty.

✓ FITS	Batches up to 50 kg requiring a consistent flow during jar filling.
✕ DOESN’T FIT	Use as a dehumidifier or a rapid melter for a complete solid mass.
⚠ PRECAUTIONS	Control time and temperature, do not run the heater empty and keep the electrical assembly dry.

SPECIFICATIONS

Brand and capacity	RuBee · approximately 50 kg of honey
Material	Stainless steel
Base	Fully sloping and heated
Power and voltage	100 W · 230 V
Control range	20–45 °C thermostat
Tank dimensions	Ø 309 × 610 mm
Gate height	105 mm above the base
Intended use	Tempering and maintaining flow during jar filling