- Pack
The bee image adorns the jar for a beekeeping range, while the closure relies on precise geometry.
These 16 Twist-Off TO82 lids are manufactured for GPI 2040 openings.
01 · COMPATIBILITY
Check the jar's finish before filling. A capacity of 720 ml or 1 kg does not, by itself, identify the opening. Discard any cracked glass and lids with damaged rims or internal compounds.
02 · THERMAL LIMIT
The Tecnocap data sheet declares up to 100 °C for 60 min. It validates the food, jar, headspace, torque, and cycle as a system; this data alone does not authorize a sterilization process.
03 · DECORATION
The design does not replace mandatory labelling. Keep the original packaging of the caps until use, protected from dust and moisture, between +5 and +35 °C and with a maximum relative humidity of 70%.
FROM THE APIARY
A Twist-Off does not screw on like a bottle cap: the six lugs ride up a short ramp and the whole closure is a quarter turn. Sit it flat until you feel it settle, turn to the stop and leave it there: carrying on does not seal better, it bends the lug and leaves the jar impossible to open. If it grates or feels like the thread has stripped, lift it off and set it down again — there is no thread to strip, a lug has ridden over its ramp.
04 · BEFORE YOU BUY
| ✓ FITS | Jars with a standard TO 82 finish, six lugs, in packs of 16. |
| ✕ DOESN'T FIT | High-neck TO 82 (Deep) jars such as the 410 ml Boca Alta, the Aura 720 Boca Alta or the Apiari 1 kg: they need a high-skirt lid. |
| ⚠ NOT INCLUDED | The jars. |
| System | Twist-Off TO82 GPI 2040 |
|---|---|
| Contents | 16 lids |
| Exterior design | Bee image |
| Configuration | Six nails |
| Pasteurization | Up to 100 °C for 60 min |
| Nominal unit weight | 14.19 g (±5%) |
Data sheet
2 files available