500 kg OF HONEY: ABOUT 360 LITRES | Ø 700 MM AND 1,035 HIGH, WITHOUT STAND |
Ø 40 STAINLESS TAP ON THE CURVE OF THE BOTTOM | AISI 304 MIRROR POLISH AND TIG WELDS, ACCORDING TO LEGA |
Lega ZERO 500 kg honey tank in AISI 304 stainless steel, mirror-polished and TIG-welded: conical bottom with the Ø 40 stainless tap on the curve itself, to drain it to the last drop, lid included. Ø 700 mm and 1,035 high without stand; about 360 litres. Because of the bottom it does not sit on the floor: the stand is essential and comes separately.
On a flat-bottomed tank the tap sits above the tank floor and the last inch of honey never comes out: the ZERO puts the tap on the curve of the bottom and the honey runs down on its own to the end.
01 · IT DOES NOT SIT ON THE FLOOR
It is the first thing to know, because it is not an option: the bottom is conical and the tap comes out underneath, so this tank does not rest on the floor. It needs a stand, and that stand is bought separately. Best settled in the same order: tell us where it goes and we will say which stand fits and how high it leaves the tap, which decides whether a bucket, a drum or the filler goes underneath.
02 · THE BOTTOM
A honey tank neither filters nor sterilises: it gives rest. Freshly extracted honey comes in with bubbles, fine wax and foam that rise over a few days, and with the lid on it takes no moisture from the room; the top layer is skimmed and the honey is bottled from the tap at the bottom, where the clean honey is. With a flat bottom, as the level drops the tap starts spitting air and kilos stay stuck; with the cone, the honey converges on the tap and comes out to the end without tilting it. What no tank fixes is honey that comes in wet: it settles, it does not dry.
03 · 500 KG IN WORKING UNITS
Honey weighs around 1.4 kg per litre, so 500 kg is about 360 litres: a thousand half-kilo jars, or a little over a drum and a half of 300 kg. The stainless tap is Ø 40, the DN40 inch-and-a-half the house tanks carry, so the usual hoses and fittings suit it; the 800 ZERO (911) goes up to Ø 50 and there a reducer is needed.
04 · STEEL AND CLEANING
Lega makes it in Italy entirely in AISI 304 stainless with a mirror-polished interior and TIG welds, the finish a tank needs when it will spend years with honey inside, which is acidic, and hot-water washes after every batch. It comes with lid and tap; it comes without a filter: to strain while filling you need a full-diameter sieve for Ø 700, which Lega sells separately. Full, it exceeds 500 kg between honey and tank: the floor and the access of the room must take it, and it ships as a bulky item.
05 · BEFORE YOU BUY
The tank is supplied with lid and tap; stand and filter come separately.
| ✓ FITS | Operations settling batches of up to 500 kg that want to bottle to the bottom without tilting or losing honey, with a DN40 honey-room line. |
| ✕ DOESN’T FIT | Anyone without room or a stand: it does not sit on the floor. For bigger batches, the 800 ZERO (911) in DN50. |
| ⚠ NOT INCLUDED | Stand or filter. |
| Reference | MADZ0500 (Lega 0587) |
|---|---|
| Model | ZERO, conical bottom, full drainage |
| Capacity | 500 kg of honey (about 360 litres) |
| Diameter | Ø 700 mm |
| Height | 1,035 mm, without stand |
| Tap | Stainless Ø 40 (DN40, 1½″), on the curve of the bottom |
| Lid | Included |
| Material | AISI 304 stainless steel, mirror polish, TIG welds (Lega) |
| Made by | Lega, Italy |
| Stand | Essential and not included |
| Filter | Not included; full-diameter sieve separately |
| Sibling | ZERO 800 kg (911), Ø 50 tap |
Data sheet
check_circle
check_circle