- New
Ø 400 mm 5 MM ACRYLIC DRUM | 2 frames TANGENTIAL, DADANT AND LANGSTROTH |
Stainless GUILLOTINE GATE AND CAGE | 5 years MANUFACTURER'S WARRANTY |
Manual tangential 2-frame extractor with a transparent acrylic drum: the same Ø 400 mm as the stainless model, but built to show extraction as it happens, at fairs, beekeeping courses and apiary visits.
A stainless extractor hides the one thing visitors want to see. Here the honey flies off the comb onto the wall and runs to the bottom in full view, and a half-hour explanation becomes two turns of the crank.
01 · WHAT FOR
With the transparent drum you can see why you start slowly with new comb, how the face against the wall empties first and what stays in the comb if you stop the cycle early. On an open day it is the moment people suddenly understand what harvesting honey is, and for a beginner one load teaches what a manual cannot in ten pages. It serves the beekeeper too: an unbalanced or badly seated frame can be seen wobbling without lifting the lid.
02 · EXTRACTION
It is tangential and not reversible: each frame rests one face against the stainless cage with 35 × 20 mm mesh, so you spin one face, turn the frame and spin the other. The maker asks for two passes: both faces slowly first, then both faces faster, so the weight of the honey on the inner face does not tear the comb off the foundation. Frames are turned only once the cage has come to a complete stop, and the crank doubles as the brake. Keep the gate open with the bucket underneath while spinning: honey pooling at the bottom slows the cage and can jam it.
03 · BUILD
It shares the Ø 400 mm diameter, the cage and the frames accepted with the stainless 2-frame BASIC extractor, and moves up a grade in what you handle every season:
| Stainless BASIC | Transparent |
|---|---|
| Stainless steel drum · plastic gear drive · 6/4″ plastic valve | 5 mm acrylic drum on a stainless base · metal drive · stainless steel guillotine gate |
Rim, legs and top beam are powder-coated, the lid is transparent and the crank with brake mounts on the beam. The drum is 500 mm high and takes Dadant and Langstroth brood frames; their supers fit the cage as well.
04 · BEFORE YOU BUY
Acrylic asks for different care from steel: wash it with warm water and soap, never with alcohol or cleaners containing it, which craze it, and no scouring pad. Before the first harvest wash the whole extractor with hot water and food-safe detergent, without flooding the shaft bearings, and store it dry and above 0 °C. If what you want is to produce without an audience, the stainless BASIC does the same job for less.
| ✓ FITS | Dadant (Blatt and US) and Langstroth brood and super frames, two at a time, to teach or to harvest a few hives. |
| ✕ DOESN'T FIT | Layens frames: not among the formats the maker declares. Nor volume harvests: it is a demonstration and small-apiary extractor. |
| ⚠ NOT INCLUDED | The bucket or honey tank to collect the honey, or the uncapping tools. |
| Type | Manual tangential extractor, non-reversible |
|---|---|
| Capacity | 2 frames |
| Compatible frames | Dadant (Blatt and US) and Langstroth; not Layens |
| Drum | 5 mm transparent acrylic, Ø 400 mm × 500 mm high, stainless steel base |
| Cage | Stainless steel, 35 × 20 mm mesh |
| Drive | Manual, metal mechanism, crank with brake on the top beam |
| Gate | Stainless steel guillotine gate |
| Frame | Powder-coated steel rim, three legs and top beam; transparent lid |
| Cleaning | Warm water and soap; no alcohol or abrasives on the acrylic |
| Warranty | 5 years from the manufacturer (2 years on fittings) |
| Reference | W233BBN_TR |
Data sheet
Specific References
check_circle
check_circle