Eco cylindrical 200W motor for SAF Natura Ø525 and Ø640 extractors. Only valid for Lyson models manufactured from 2025.
Replacement cylindrical motor SAF SM3 EKO, 200 W at 12 V, for the small SAF Natura extractors built from 2025 on.
The year is the first thing to check. SAF changed motor and control panel in 2025. This is the new one: it does not fit the earlier machines or the old panels, even when the extractor carries the same name.
01 · ONLY FROM 2025
A Regata or a Malaga from 2023 and one from 2025 share a name and do not share electronics. This motor belongs to the new series; for the earlier machines the spare is a different one, and so is the control panel.
So the check is not by model but by model and year. If in doubt, look at the motor that is fitted before ordering: a photo of the plate settles the purchase.
02 · WHICH EXTRACTORS TAKE IT
It is the motor of the small extractors in SAF Natura's economy range: Regata, Ritmo, Racing, Kadett, Fuego, Ibiza, Carrera, Modus or Malaga, among others. They all share the same cylindrical body and the same 14 mm shaft.
If your extractor is not on that list, it is worth asking before ordering: by power and by shaft, this motor is meant for small drums, not for the big radials.
03 · 230 V TO THE PANEL, 12 V TO THE MOTOR
The installation is single-phase 230 V, but that is what goes into the control panel. The motor works at 12 V and 200 W, at 3,400 revolutions with a 7.5 ratio reducer.
That is worth having clear when diagnosing: if the motor does not turn, it may be the motor or it may be the panel no longer delivering those 12 V. Before changing the motor, check that voltage is reaching the connector.
04 · BEFORE YOU BUY
An original spare with a cut-off date.
| ✓ FITS | Small SAF Natura extractors built from 2025: Regata, Ritmo, Racing, Kadett, Fuego, Ibiza, Carrera, Modus, Malaga. |
| ⚠ CONFIRM MODEL AND YEAR | If your extractor is not on the list or you do not know its year, ask first: the pre-2025 motor is a different one. |
| ✕ NOT FOR OLD PANELS | It is not compatible with the motors or the control panels from before the 2025 change. |
| Part | Original replacement cylindrical motor |
|---|---|
| Model | SAF SM3 EKO |
| Power | 200 W |
| Motor supply | 12 V |
| Panel input | 230 V single-phase |
| Speed | 3,400 rpm |
| Reducer | 7.5 ratio |
| Shaft | 14 mm |
| Compatibility | Small SAF Natura extractors built from 2025 |
| Not compatible | Motors and panels from before 2025 |
| Reference | SN_SM3 |
Data sheet
Eco cylindrical 200W motor for SAF Natura Ø525 and Ø640 extractors. Only valid for Lyson models manufactured from 2025.
check_circle
check_circle