Rectangular roof feeder holding 4 litres, with a lid and a protected central access: the syrup stays within the hive's volume.
Rectangular roof feeder with 4 L capacity, lid and protected central access. It allows syrup to be supplied inside the hive, with less risk of robbing than an external container and without leaving the entire surface of the liquid exposed to the bees.
01 · THE MEASUREMENT DECIDES
The body measures approximately 325 × 385 × 55 mm. It is designed for Langstroth and Dadant, but these hive bodies, crownboards and roofs vary by manufacturer. Check the usable area and available height, position it level and ensure that the central access point connects to the interior without leaving any gaps to the outside.
02 · BEFORE YOU BUY
Adjust the feed rate to suit the colony’s strength, the temperature and the rate of consumption. Do not provide syrup during a commercial honey flow or in supers intended for harvesting. Remove any leftovers before they ferment, wash the feeder between uses and monitor condensation: a small colony may take too long to consume a large volume.
| ✓ FITS | When you want the syrup inside and less exposed to robbing than an external container. |
| ⚠ MEASURE BEFORE ORDERING | Boxes, crown boards and roofs vary by maker: check usable surface and available height. |
| LTA reference | 00603 |
|---|---|
| Type | Rectangular roof feeder |
| Capacity | 4 litres |
| Approximate dimensions | 325 × 385 × 55 mm |
| Weight | 1 kg |
| Access | Central and protected, with a lid |
| Intended for | Langstroth and Dadant |
| Check | Usable surface, available height and that the access leaves no gaps to the outside |

check_circle
check_circle