Candle mould - Christmas tree

53 .95 €

FS19

LYSON

Candle mould - Christmas tree

Name: Candle mould - Christmas tree
Brand: LYSON
SKU: FS19
Price: 53.95 EUR
Availability: InStock

Share in WhatsApp

53 .95 €

Tax included

Stock

Lyson FS19 split silicone mould for a 19 × 8.5 × 6 cm Christmas tree candle with stars. Nominal wax use ≈250 g; the recommended 3×10 wick is a starting point, so burn-test your wax and additives. One mould only; wax, wick, closures and release agent are separate.

53 .95 €

Tax included

Stock

Quantity

Select options Options

Express Shipping

Return Guarantee

Safe payment

Details of Candle mould - Christmas tree

FS19

MODEL

19 CM

CANDLE HEIGHT

≈250 G

WAX

3×10

LYSON WICK

Lyson FS19 split silicone mould for casting a three-dimensional Christmas tree candle with stars. The finished candle measures approximately 19 × 8.5 × 6 cm and uses about 250 g of wax, so a 500 g pack provides a nominal two pours once normal process losses are allowed for.

The reference, EAN and shape agree across Lyson's official catalogue, the purchase invoice and LTA's images. The 19 cm figure is the height of the finished casting; the mould itself is 21 cm high. Lyson recommends a 3×10 wick, but this is a starting specification that still needs checking with the actual wax and additives.

01 · RESULT AND DIMENSIONS

A tall tree with branch and star relief

FS19 produces a conical, freestanding piece with an approximate 8.5 × 6 cm base. The 250 g wax figure is indicative and can change with wax density, fill level and base finishing. Separating the mould's external height —21 cm— from the usable candle height —19 cm— helps avoid mistakes when cutting the wick, choosing a melting vessel or planning the finished packaging.

02 · SET-UP AND POUR

Centre the wick and secure the split before filling

Feed a wick longer than the mould through its centre, hold it under light tension with a toothpick or wick bar, and close the mould split evenly with rubber bands or string. A light coat of silicone release agent may be used to ease removal. Pour slowly so wax reaches the relief, then allow it to cool fully before removing the ties and opening the mould. Protect against hot-wax splashes and do not use sharp tools inside the cavity.

03 · WAX, WICK AND TESTING

A 3×10 recommendation does not replace a burn test

Follow the wax supplier's melting and pouring range: Lyson's own page gives different general temperatures, and no single value suits every formulation. Wax type, fragrance and colourant all change how fuel reaches the flame; use candle-grade additives and test the finished candle before repeating a batch. Avoid pigments not intended for burning and dry decorative inclusions near the wick, as they can obstruct it or disturb the flame.

04 · BEFORE YOU BUY

The mould defines the shape; the finished candle determines safety

One FS19 mould is supplied. Wax, wick, bands, wick holder and release spray are separate. Before lighting, trim the wick to about 6 mm, place the candle on a stable heat-resistant surface away from draughts and combustible materials, and never leave it unattended. If candles will be sold, test the formulation and every change of wax, wick, dye or fragrance; the mould alone does not establish conformity with EN 15493.

SUITS	Small-batch Christmas candles requiring a detailed freestanding 19 cm piece.
VALIDATE	Wick, process temperature and burn behaviour with the formulation actually used.
NOT INCLUDED	Wax, wick, bands, toothpick/wick bar or release spray.

CONFIRMED DATA AND PROCESS CONTROL

Manufacturer	Lyson
Model / reference	FS19
EAN	5903661502034
Type	Split mould for a three-dimensional candle
Material	Silicone
Design	Christmas tree with stars
Finished candle size	19 × 8.5 × 6 cm (H × W × L)
External mould height	21 cm
Wax per pour	≈250 g; indicative value
Lyson recommended wick	3×10; starting point subject to testing
Split mould	Yes
Included	One FS19 mould
Not included	Wax, wick, closures, holder or release agent
Pouring temperature	70-75 °C · wax melts at 62-65 and darkens above 85