- New
- Pack
2747 ,00 €
Order it before 3 hours and 51 minutes and receive it between tomorrow and Tuesday, 24 November with Ontime
Filling kit with the FillOmat® honey filling machine and its 640 mm motorised rotary table: the table brings each jar to the nozzle and carries it away full, while the FillOmat doses from 30 g to 45 kg.
These are the two machines we sell separately, in a single purchase. The table only works connected to the FillOmat, and the FillOmat only reaches its real output when it does not have to wait for someone to place the next jar.
01 · WHAT EACH ONE DOES
The FillOmat is a volumetric filler: it doses by flow and time, not by weight. It handles up to 600 jars of 500 g per hour, with 1 to 2 % accuracy depending on the honey, the dose and the speed.
The table takes care of the other half of the job. Empty jars go in on the left, the 640 mm plate moves them between the guides to the filling point and takes them out full on the right. Its 24 V, 50 W, 20 Nm motor turns at up to 4 rpm, a slow pace that keeps step with the dose. Placing, capping and removing the jars is still the operator's work: the table automates the feed.
02 · SETTING UP
The FillOmat drive module has the connection for the rotary table. According to its manual, the sensor is set to PNP mode for automatic work with the table.
Before each run, adjust the guides and the detection point to the diameter and shape of the jar, and do one turn with a few empty jars. Every change of jar size means repeating this. To clean or correct anything, stop the plate and disconnect it: never with the table moving.
03 · THE HONEY SETS THE LIMITS
The FillOmat fills between 20 and 40 °C. That ceiling is set by the honey: above 40 °C, HMF rises. Dense honeys such as rapeseed are best warmed to 25-35 °C before filling.
In pumping mode it recirculates the honey to seed it with creamed honey and start a controlled crystallisation. The manufacturer recommends 3 to 8 cycles, one a day, until the texture is even.
04 · BEFORE YOU BUY
Both machines arrive exactly as they are sold separately. The FillOmat comes with 1.5 m of 38 mm suction hose, the non-return valve, two nozzles and two stainless steel clamps.
| ✓ FITS | Filling long runs of 125 g to 1,000 g jars with the complete workstation from day one. |
| ✕ DOES NOT FIT | If you already own the FillOmat: the rotary table alone (BR-31524) is enough. If you need the exact gram per jar: a weighing filler is the better choice. |
| ⚠ NOT INCLUDED | Honey tank, jars, hopper (BR-31531) or level sensor (BR-31510). |
| Reference | KITFILLOMAT640 |
|---|---|
| Contents | 1 FillOmat® honey filling machine (BR-31540) + 1 motorised rotary table Ø 640 mm (BR-31524) |
| Dosing | Volumetric, 30 g to 45 kg · 1-2 % accuracy |
| Output | Up to 600 jars of 500 g/h |
| Jar sizes with table | 125 g to 1,000 g honey jars, adjusting guides and sensor |
| Table | 640 mm plate · 24 V DC motor, 50 W, 20 Nm · up to 4 rpm |
| Filling temperature | 20 to 40 °C · warm dense honeys to 25-35 °C |
| Filler power supply | 230 V · 350 W · below 80 dB |
| Weight | Filler 10 kg · table 30 kg |
Data sheet
Write your question
check_circle
check_circle