The FillOmat® is an advanced solution for honey filling and processing, ideal for beekeepers seeking precision and efficiency. Designed for both liquid and creamy honey, this machine allows you to manage large volumes easily, with the ability to dose with a precision of +/- 2 grams, ensuring exact filling with no waste.
Volumetric filler with touchscreen control: 30 g to 45 kg per dose, up to 600 jars of 500 g per hour and pumping up to 400 kg/h. It also pumps and blends creamed honey.
It is not just a filler: in pumping mode it makes creamed honey. And that second function is what justifies the price gap against an ordinary filler.
01 · WEIGHING OR DOSING
This machine doses by flow and time, not by weight. Its accuracy is 1 to 2 % depending on the honey, the quantity and the speed — on a 500 g jar, 5 to 10 grams.
In exchange it gives 600 jars of 500 g per hour, which is 300 kg/h: more than three times a weighing filler. The choice between the two is exactly that: accuracy per jar against jars per hour.
02 · THE PUMPING MODE
Besides filling, it pumps and blends: the recirculation mode lets you seed honey with creamed honey and start a controlled crystallisation, which is how you get a fine-textured creamed honey instead of a grainy jar.
The maker specifies 3 to 8 pumping cycles, a day apart, until the texture is even. It is a process of days, not of an afternoon, and the machine does the mechanical part.
03 · 40 °C IS THE CEILING
Filling is adjusted between 20 and 40 °C so the honey flows. That top figure is not a limitation of the device: it is where the honey's limit sits, because above 40 °C it starts paying for the heat in HMF, a parameter with legal force.
For dense honeys — rape and the like — the maker recommends warming to 25-35 °C before filling. Within that margin you gain fluidity without touching the analysis.
04 · IT COMES APART
It is built in modules: you change the nozzle diameters to suit the jar, and also the pump or the hose system. That is the answer to whether spares can be had — it is not a sealed casing but a set of parts replaced one at a time.
The head carries a priming tap for filling the machine with honey at the start, which is the awkward part of any doser.
05 · WHAT IS IN THE BOX
It ships with 1.5 m of 38 mm suction hose, its non-return valve, two interchangeable nozzles and two stainless steel clamps.
It runs on 230 V at 350 W and stays under 80 dB, which in a closed honey house is appreciated more than it sounds.
06 · BEFORE YOU BUY
This is a volumetric doser: fast and consistent, with 1-2 % tolerance. If what you need is the exact gram, a weighing filler is what gives it.
| ✓ RIGHT FIT | Filling at volume and, on top of that, making creamed honey with the same machine. |
| ✕ WRONG FIT | If the criterion is accuracy per jar: weighing wins there. |
| ⚠ NOT INCLUDED | The honey tank or the jars. |
| Dosing | Volumetric, 30 g to 45 kg |
|---|---|
| Accuracy | 1-2 % depending on honey, quantity and speed |
| Output | Up to 600 jars of 500 g/h — around 300 kg/h |
| Pumping | Up to 400 kg/h |
| Creaming mode | Recirculation to seed and start crystallisation — 3 to 8 cycles, a day apart |
| Filling temperature | 20 to 40 °C · dense honeys, warm to 25-35 °C |
| Control | Electronic, touchscreen |
| Priming | Tap on the head |
| Includes | 38 mm suction hose, 1.5 m · non-return valve · 2 nozzles · 2 stainless clamps |
| Power | 230 V · 350 W |
| Noise | Under 80 dB |
| Size | 34.5 cm wide · 50 cm high |
Data sheet
2 files available
The FillOmat® is an advanced solution for honey filling and processing, ideal for beekeepers seeking precision and efficiency. Designed for both liquid and creamy honey, this machine allows you to manage large volumes easily, with the ability to dose with a precision of +/- 2 grams, ensuring exact filling with no waste.
check_circle
check_circle