Stainless steel stand with tilting platform and braked castors, suitable for settling tanks, creamers, mixers or wax melters from Ø400 to Ø700 mm. Allows up to 3 % tilt toward the outlet for almost complete gravity draining with minimal effort.
Stainless steel stand on wheels for settling tanks, creamers and mixers, in four heights from 400 to 700 mm.
The height is the whole purchase: 400, 500, 600 or 700 mm. And the price goes with it, from €351.24 to €412.40. What you choose when you choose the height is not comfort: it is what fits under the tap when the time comes to empty it.
01 · FOUR HEIGHTS, FOUR PRICES
The sizes are 400 mm (€351.24), 500 (€371.90), 600 (€392.56) and 700 (€412.40). Between the lowest and the highest there is €61.16, so money should not decide: what you are going to put underneath should.
Allow for the tank's own tap, which already sits a few centimetres above its base. A 25 kg bucket asks little; a 100 kg settling tank to decant into, a good deal more. Measure it on the honey-house floor before choosing a size.
02 · TO GET THE LAST KILO OUT
Emptying the bottom of a settling tank by tilting it by hand, on a wet floor with two hundred kilos on top, is the manoeuvre that causes most injuries in a honey house. Up on a stand, the tank empties by gravity to the end and nobody has to balance anything.
It suits settling tanks, creamers, mixers and homogenisers: any vessel with a bottom tap gains the same.
03 · AND IT MOVES LOADED
It runs on wheels, so the tank stops being furniture: it goes over to the bottler, comes away so the floor can be cleaned, and goes back without being emptied first.
It is stainless steel, like the tank standing on it, so it does not introduce a different material into the food area that has to be cleaned separately.
04 · BEFORE YOU BUY
Measure what goes under the tap, then choose the height.
| ✓ A GOOD FIT | Emptying by gravity and moving the tank loaded: four heights from 400 to 700 mm, on wheels. |
| ⚠ THE HEIGHT IS THE DECISION | There is €61.16 between the lowest and the highest. Choose by what fits underneath, not by price. |
| ✕ IT IS NOT A SCALE OR A TROLLEY | It is a stand on wheels: it lifts and it rolls. It does not weigh and it does not climb steps. |
| Type | Wheeled stand for honey tanks |
|---|---|
| Available heights | 400, 500, 600 and 700 mm |
| Price by height | 400 mm €351.24 · 500 mm €371.90 · 600 mm €392.56 · 700 mm €412.40 |
| Compatibility | Settling tanks, creamers, mixers and homogenisers |
| Mobility | On wheels |
| Material | Stainless steel |
| Manufacturer | Lyson, Poland |
| Reference | W660L |
Stainless steel stand with tilting platform and braked castors, suitable for settling tanks, creamers, mixers or wax melters from Ø400 to Ø700 mm. Allows up to 3 % tilt toward the outlet for almost complete gravity draining with minimal effort.
check_circle
check_circle