25kg Honey Tank Quarti®

77 .95 €

M43

QUARTI

25kg Honey Tank Quarti®

Out of stock

Share in WhatsApp

77 .95 €

Tax included

Out of stock

Quarti M43 settling tank for 25 kg of honey, made from TIG-welded AISI 304 stainless steel. Supplied with a clear dust cover and Ø 40 mm R11 food-grade nylon gate; stand, handles and strainer are optional.

77 .95 €

Tax included

Out of stock

Quantity

Select options Options

Express Shipping

Return Guarantee

Safe payment

Details of 25kg Honey Tank Quarti®

25 kg

NOMINAL HONEY CAPACITY

AISI 304

STAINLESS STEEL

Ø 310 mm

BODY DIAMETER

Ø 40 mm

R11 HONEY GATE

A compact settling tank for receiving, resting and dispensing up to 25 kg of honey without oversizing the honey room.

Quarti M43 is made in Italy with an AISI 304 stainless-steel body and TIG-welded base and shell. It comes with a clear polycarbonate dust cover and an R11 food-grade nylon gate with stainless screws and silicone seals.

01 · PURPOSE

Settling by rest, not instant filtration

After straining, resting lets entrained air, foam and small, less-dense wax fragments rise. They can be skimmed from the surface while honey is drawn through the lower gate. This improves physical separation of floating material, but it does not remove dissolved matter or replace suitable filtration before filling. Required settling time changes with temperature, viscosity and solid load; it should not be presented as a fixed number of days for every batch.

02 · WORKING CAPACITY

25 kg means honey mass, not 25 litres

Capacity is stated for honey and is not a universal volume rating for every liquid. Leave headspace for foam and safe handling, particularly when honey enters warm or aerated. Allow the batch to settle before opening the gate and make sure the receiving jar fits below it. The outlet is near the base, but this model is not described as a flush, total-drain tank; a small remainder may need to be collected manually.

03 · COVER AND GATE

Dust protection rather than a sealed lid

The clear polycarbonate cover makes the surface visible and protects the resting honey from dust. It has no pressure clamps and is not specified as airtight, so the tank is not for vacuum, pressurised fermentation or transport while full. The R11 gate has a nominal 40 mm passage, a food-grade nylon body, stainless screws and silicone seals. Before the first batch, check assembly, tightening and leak-tightness with a controlled test.

04 · HANDLING AND CLEANING

Plan for the weight when full

A 25 kg honey load plus the vessel itself must not be moved by the cover or gate. Position the empty tank on a flat, stable base and fill it where it will be used. Handles and a stand are manufacturer options; they are not part of this reference unless the order states otherwise. Clean steel, cover, gate and seals with food-contact-compatible products, rinse thoroughly and dry every part before closing or storing the tank.

05 · BEFORE BUYING

Confirm working height and options

The manufacturer confirms a 310 mm diameter but its current sheet does not state total height. If the tank must fit on a shelf or below another machine, request a measurement of the available unit and allow room to lift the lid and place a jar.

✓ SUITABLE	Small batches of pre-strained honey requiring rest and manual dispensing.
✕ NOT A	Sealed pressure vessel, heated tank or filter-equipped unit.
⚠ NOT INCLUDED	Stand, optional handles, full-diameter filter or filling vessel.

TECHNICAL DATA

Reference	M43
Nominal capacity	25 kg of honey
Material	AISI 304 stainless steel; TIG-welded base and shell
Diameter	310 mm
Cover	Clear polycarbonate dust cover with knob
Gate	Quarti R11, food-grade nylon, Ø 40 mm, stainless screws and silicone seals
Manufacturer options	S38 stand, stainless handles and full-diameter strainers
Origin	Made in Italy