- Made in 🇫🇷
Plastic bar with eleven seats that fixes to the bar of the cell-raising frame and receives the NICOT strip of cell cups.
It is the middle link: neither the cup nor the frame, but what holds the series in line.
01 · WHERE IT SITS
This bar fixes to the wooden bar of the cell-raising frame; the strip of grafting cups goes into its eleven seats in one piece, and the larva goes into each cup. It is the alternative to individual holder blocks: the eleven queen cells end up at the same height and evenly spaced without placing them one by one.
02 · THE 16 MM
This is where the build goes wrong. The bar is made for a 16 mm wide wooden bar: if the one on the frame you already own is wider or narrower, it will not seat.
Check it before preparing the series: the fault shows up with the cups already loaded, and grafting does not wait.
03 · SERIES OR CAGE
On this bar the queen cells sit in a row. If you want to cage each one in a protective roller so they hatch separately, the part that takes the roller is the individual cup holder block, not this bar.
And for royal jelly the bars are different ones, of 33 and 66 cups.
04 · BEFORE YOU BUY
Sold on its own: no cups, no frame and no larvae.
| ✓ FITS | Cell-raising frame with a 16 mm wide wooden bar. |
| ✕ DOESN’T FIT | Bars of any other width. And it is not a royal jelly bar. |
| ⚠ NOT INCLUDED | The grafting cell cups. |
| Brand | NICOT® |
|---|---|
| Material | Plastic |
| Seats | 11 |
| Length | 13.5 cm |
| Fixing | Wooden bar 16 mm wide |
| Takes | The system’s strip of grafting cups |
| Sold as | 1 bar |
Data sheet
1 file available

Write your question
check_circle
check_circle