- Top quality
400 W OF POWER, 22 A | 10 s 2 G AT 260 °C |
1-4 g TOOL-FREE DISPENSER | 1.25 kg WITHOUT BATTERY |
InstantVap® Turbo 18V: a 400 W battery-powered oxalic acid sublimator that sublimes 2 g in 10 seconds at 260 °C, with LED display, 1-4 g dispenser and a socket for 18-20 V power-tool batteries. The fastest of the InstantVap range, for hobbyists and professionals. Battery and charger not included.
When you arrive at the apiary in the dead of winter, with daylight fading fast and the bees clustered tight in the brood nest, every minute matters.
The InstantVap® 18V Turbo cuts out generators, extension leads and endless warm-up times: clip on your drill battery, switch on and you're sublimating within seconds. With 400 W of power and a treatment time of 10 seconds per hive (2 g at 260 °C), this unit has proven in the field that a single beekeeper can treat 120 hives in 20-25 minutes using three units. That's not a sales pitch — it's what real beekeepers are doing right now.
01 · POWER
The difference between sublimating at 230 °C and 260 °C shows mostly in time: those same 2 g take 25 seconds at 230 °C and just 10 at 260 °C. The manufacturer recommends always working in Turbo mode at 260 °C and backs it with its own study, according to which the vapour at that temperature retains up to 73% oxalic acid, with 6% formic acid: heating fast breaks down less of the active ingredient.
02 · BATTERY
Compatible with 18V/20V batteries from Makita®, DeWalt®, Bosch®, Milwaukee®, Parkside® and other major brands. Range depends directly on amp-hours: a 6 Ah battery covers around 30 hives; 8 Ah gets you to 40-45; 12 Ah takes you past 60. The key is choosing the right Ah for your operation — and that's where the Turbo scales from a hobbyist with 10 hives to a commercial outfit running hundreds. One important note: avoid cheap generic batteries from dubious sources. There are documented cases of fake 8 Ah batteries that couldn't even heat the crucible.
03 · AT SCALE
There's a persistent myth that battery sublimators aren't built for commercial use. The field data says otherwise. An Australian beekeeper treats 120 hives in 20-25 minutes working solo with 3 Turbos. Two brothers run through 120 hives in 40 minutes with 2 units. No generator-powered sublimator gives you that speed and freedom of movement. The recommended pro setup: 2 Turbos + 2 Parkside® 12 Ah batteries (a quarter of the price of other brands, same performance). While you're sublimating with one, the other cools down and the spare battery charges on the vehicle inverter. No downtime, no cables dragged between hives, no hauling a generator from apiary to apiary. Just 1.25 kg in your hand and the job done.
04 · DISPLAY
No more guesswork. The built-in LED display shows real-time crucible temperature (adjustable between 230 and 260 °C), battery voltage and a cycle counter so you can keep accurate track of how many hives you've treated. The status LED clearly indicates whether the unit is heating, ready or vaporising — visible even in full sunlight. It also includes deep-discharge protection for the battery, so you won't be caught out mid-round.
05 · THE UNIT
Until now you had to choose: the Compact for its ergonomics and stability, or the Original for its display and advanced settings. The Turbo brings both lines together: the robust, easy-to-handle design of the Compact with the information and controls of the Original, plus more power and a wider range of settings. Built from stainless steel with a replaceable brass nozzle, the doser adjusts from 1 to 4 g without tools. At just 1.25 kg without the battery, it's a unit you can carry all day without fatigue.
06 · RESPONSIBLE USE
The InstantVap® Turbo is designed for use with registered veterinary medicines whose active ingredient is oxalic acid. Check which ones are authorised for sublimation in your country and use the dose in their leaflet (in Spain, Varroxal and Api-Bioxal powder, 2 g per hive). The use of pure oxalic acid in any form is prohibited in most jurisdictions and constitutes an illegal practice. A gas-protection respirator is mandatory during treatment. Remember that oxalic acid does not penetrate capped brood: for maximum efficacy, treat during periods of little or no brood.
07 · BEFORE YOU BUY
| ✓ FITS | Anyone treating varroa with sublimed oxalic acid, from 10 to hundreds of hives, who already owns 18-20 V power-tool batteries of one of the socket brands. |
| ✕ DOES NOT FIT | Anyone wanting to vaporise pure oxalic acid: registered medicines only. And each unit ships with a single socket: choose your battery’s when ordering. |
| ⚠ NOT INCLUDED | Battery and charger; respirator and medicine sold separately. |
| Power | 400 W / 22 A |
|---|---|
| Adjustable temperature | 230 – 260 °C |
| Sublimation time | 10 s (2 g at 260 °C) / 25 s (2 g at 230 °C) |
| Doser | Adjustable from 1 to 4 g (tool-free) |
| Display | LED — temperature, battery voltage, cycle counter |
| Status indicator | LED light (heating / ready / vaporising) |
| Material | Stainless steel & replaceable brass nozzle |
| Weight | 1.25 kg (without battery) |
| Battery compatibility | 18V / 20V — Makita®, DeWalt®, Bosch®, Milwaukee®, Parkside® & others (min. 4 Ah) |
| Estimated range | ~30 hives (6 Ah) · ~40-45 hives (8 Ah) · 60+ hives (12 Ah) |
| Protections | Battery deep-discharge protection |
| Compatible medicines | Oxalic acid medicines authorised for sublimation (in Spain: Varroxal, Api-Bioxal powder) |
1 file available
No. The battery and charger are not included. The package contains the InstantVap® Turbo with your chosen battery socket, one dispenser, one cleaning cap and two spare O-rings for the dispenser. Batteries shown in the product images are for illustration only.
Each unit is compatible only with the battery socket selected when ordering; it is not a universal socket. Available options are Makita LXT, Parkside X20V-TEAM, Einhell Power X-Change, AEG/Ridgid, Milwaukee M18, DeWalt 18V, Bosch GBA/ProCore 18V, Hikoki/Hitachi and Metabo 18V. Use an 18-20 V battery with at least 4 Ah capacity. Check your exact battery platform before choosing the variant.
After use, switch the unit off, remove the battery and allow it to cool. Clean the dispenser and check the outlet tube for crystallised residue. If blocked, the manual allows careful use of a drill bit up to 3 mm, only when the unit is cold. Do not immerse the unit, cool hot parts with water or force the dispenser.
Sorry, no results found.
Write your question